Wireless Baby Monitoring System Using Sensors With Arduino & GSM-SMS Alert| Live Streaming IP Camera
Wireless Baby Monitoring System Using Sensor’s With Arduino & GSM SMS Alert| Live Streaming Wi-Fi IP Camera | Baby Monitoring System Using Wireless Sensor Networks Camera & GSM SMS Alert | baby monitoring system using arduino | baby monitoring system project ppt | smart baby monitoring system using mobile app | baby monitoring system using iot | baby monitoring system using raspberry pi | iot based baby monitoring system using arduino | an intelligent system for infant cry detection and information in real-time using iot.
***********************************************************
If You Want To Purchase the Full Working Project KIT
Mail Us: svsembedded@gmail.com
Title Name Along With You-Tube Video Link
We are Located at Telangana, Hyderabad, Boduppal.
Project Changes also Made according to Student Requirements
http://svsembedded.com/ https://www.svskits.in/
http://svsembedded.in/ http://www.svskit.com/
M1: +91 9491535690 M2: +91 7842358459
We Will Send Working Model Project KIT through DTDC / DHL / Blue Dart / First Flight Courier Service
We Will Provide Project Soft Data through Google Drive
1. Project Abstract / Synopsis
2. Project Related Datasheets of Each Component
3. Project Sample Report / Documentation
4. Project Kit Circuit / Schematic Diagram
5. Project Kit Working Software Code
6. Project Related Software Compilers
7. Project Related Sample PPT’s
8. Project Kit Photos
9. Project Kit Working Video links
Latest Projects with Year Wise YouTube video Links
157 Projects https://svsembedded.com/ieee_2022.php
135 Projects https://svsembedded.com/ieee_2021.php
151 Projects https://svsembedded.com/ieee_2020.php
103 Projects https://svsembedded.com/ieee_2019.php
61 Projects https://svsembedded.com/ieee_2018.php
171 Projects https://svsembedded.com/ieee_2017.php
170 Projects https://svsembedded.com/ieee_2016.php
67 Projects https://svsembedded.com/ieee_2015.php
55 Projects https://svsembedded.com/ieee_2014.php
43 Projects https://svsembedded.com/ieee_2013.php
1100+ Projects https://www.svskit.com/2022/02/900-projects-ideas_8.html
***********************************************************
Creating a wireless Wi-Fi IP camera-based baby monitoring system using Arduino and sensors is a great project that combines hardware and software skills. This system will allow you to monitor your baby remotely through a live video feed and receive alerts when certain conditions, such as noise or motion, are detected. Here’s a step-by-step guide on how to build such a system:
Components Required:
1. Arduino board (e.g., Arduino Uno or ESP8266)
2. Wi-Fi module (e.g., ESP8266, ESP32)
3. IP camera module (e.g., ESP32-CAM or a compatible camera module)
4. Motion sensor (PIR sensor)
5. Sound sensor (e.g., microphone sensor)
6. Power source (battery or power adapter)
7. Breadboard and jumper wires
8. Smartphone or computer for monitoring
Step 1: Setting up the Hardware
1. Connect the IP camera module to your Arduino board. Make sure it is compatible with your chosen Arduino model and can be controlled via Arduino.
2. Connect the motion sensor and sound sensor to the Arduino using digital or analog pins. Refer to the datasheets for wiring details and code examples.
3. Power the Arduino and sensors using a suitable power source. If using a battery, ensure it provides sufficient power for continuous operation.
Step 2: Setting up the Wi-Fi Connection
1. Configure your Arduino board to connect to your Wi-Fi network using the Wi-Fi module. You’ll need to provide your Wi-Fi SSID and password in your Arduino code.
2. Make sure your Arduino board can establish a stable connection to the Wi-Fi network.
Step 3: Programming the Arduino
1. Write the Arduino code to capture video from the IP camera module and stream it over the Wi-Fi network. You can use libraries like ArduinoHttpClient or ArduinoWebsockets to facilitate this.
2. Implement code for the motion sensor and sound sensor to detect motion and noise in the baby’s room. When motion or noise is detected, trigger an event to capture a snapshot or start streaming video.
3. Create a user interface on the Arduino that can be accessed remotely (e.g., a simple web page) to view the live camera feed and sensor data.
Step 4: Sending Alerts
1. Set up alert mechanisms, such as sending push notifications or emails when motion or noise is detected. You can use services like Pushbullet, IFTTT, or your email provider’s SMTP server for this purpose.
Step 5: Remote Monitoring
1. On your smartphone or computer, create an application or use a web browser to access the live camera feed and sensor data remotely. You can use a web server running on the Arduino for this purpose.
Step 6: Monitor Your Baby
1. Access the live feed from your smartphone or computer and monitor your baby remotely.
Views : 28
GSM
