CCIE EI RS 1.7 : Ipv6 eigrp in HQ
SECTION 1.7: IPv6 EIGRP in HQ
In HQ enable EIGRP for IPv6 on r11, r12, sw101 and sw102 according to these requirements:
1. Use process name “ccie” (without the quotes) and AS number 65001.
2. Do not configure any additional IPv6 addresses
3. IPv6 EIGRP may form adjacencies only over the physical Layer3 interface between r11, r12,
sw101 and sw102.
4. Prevent IPv6 EIGRP from automatically running on, or advertising attached prefixes from new
IPv6-enabled interfaces in the future unless allowed explicitly.
5. Ensure that the attached IPv6 prefixes on SVI’s Vlan2000 and Vlan2001 on SW101 and sw102
are advertised in IPv6 EIGRP and learned on r11 and r12.
6. No route filtering is allowed to accomplish this entire task.
Views : 91
ipv6