No Soldering Needed! Build a 2m Tape Measure Yagi Antenna
In this video, we’re diving into the world of DIY antenna building with a twist – no soldering required! Join us as I guide you through the process of creating your own 2m Tape Measure Yagi Antenna from start to finish.
With 7.3 dBd Gain, your 8Watt HT will have over 40Watts ERP.
Your 50Watt Mobile would have over 250Watts ERP!
Whether you’re a seasoned ham radio operator or just getting started in the hobby, building your own antenna can be a rewarding experience. With the step-by-step instructions, you’ll be able to construct a high-performance portable antenna that’s perfect for the 2 meter band.
All you need are some basic tools and a willingness to learn. By the end of this video, you’ll have a functional antenna that you can use for various ham radio activities, including fox hunting, portable operations, satellites, and more.
Parts list:
1 x 5-foot piece of 3/4 inch Schedule 40 PVC tube
6 x 3/4 to 1-1/2 Inch Adjustable Worm Gear Hose Clamps
4 x #8 Ring terminals
2 x #8 Washers
2 x #8 x 1/2 inch metal screws
1 x 25-foot 1-inch wide steel tape measure (will be destroyed)
1 x RG8X cable, approximately 6 feet
1 x 5-inch piece of 14 gauge solid wire
4 x Zip Ties
Thanks for Watching! Please Like and Subscribe!
Also Check Out The Facebook Group,
https://www.Facebook.com/Groups/TheTypicalHam
#HamRadio #Amateur Radio #POTA #APRS #Baofeng #Yaesu
Views : 822
antenna
