Mourad ELGORMA

Mourad ELGORMA

Fondateur de summarynetworks, passionné des nouvelles technologies et des métiers de Réseautique , Master en réseaux et système de télécommunications. ,j’ai affaire à Pascal, Delphi, Java, MATLAB, php …Connaissance du protocole TCP / IP, des applications Ethernet, des WLAN …Planification, installation et dépannage de problèmes de réseau informatique……Installez, configurez et dépannez les périphériques Cisco IOS. Surveillez les performances du réseau et isolez les défaillances du réseau. VLANs, protocoles de routage (RIPv2, EIGRP, OSPF.)…..Manipuler des systèmes embarqués (matériel et logiciel ex: Beaglebone Black)…Linux (Ubuntu, kali, serveur Mandriva Fedora, …). Microsoft (Windows, Windows Server 2003). ……Paquet tracer, GNS3, VMware Workstation, Virtual Box, Filezilla (client / serveur), EasyPhp, serveur Wamp,Le système de gestion WORDPRESS………Installation des caméras de surveillance ( technologie hikvision DVR………..). ,

47 réflexions sur “Sprint Force ZTE Screen Repair Video Tear Down

  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    my screen wont respond the screen won respond when i touch it like unlocking it what can i do 

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    HELP!!! I have a zte n861 it was working fine but I took the battery out but when I turned it back on their is a glow, but no picture????? Please help!!!

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    Do you think the ZTE source is about the same?  I just ordered a new screen for mine, will have to install in when it gets here?

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    yo jerry! small question if i may: few days ago i plugged in the usb cable to my cheap chinese cell phone and then the small metallic port inside the phone (the one that 'touches' the usb connector) disconnected from its place on the green board. okay, the question: what do i need to reconnect there? i can see the 2 points on the sides of the small port, BUT i am also seeing that there are like 4-6 really really tiny broken wires. what to do?

    THANK YOU VERY MUCH

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    would this also work for a ZTE merit? and do you have a video on how to replace the screen, my screen cracked and i need to replace it.

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    if i have dropped my phone in the toilet and i put it in rice for like 2 days and i have used it and it works fine but now my screen wont respond to the touch!!??? Help!!

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    hi, quick question i have the zte racer x850 i need to replace the screen, does this video of yours work the same way?

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    great video but i want to know how do you know if you have water damage and can you dip the entire motherboard in isoproply to get rid of those nasty minerals and electrons from the phone that got dirty please answer thanks 

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    I ordered a digitizer screen. Did i order the right thing. My screen is shattered into oblivious pieces.. thank you.

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    I ordered a digitizer screen. Did i order the right thing. My screen is shattered into oblivious pieces.. thank you.

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    I just gotta say thx, I rly mean it. This vid saved my sanity. I was trying to figure out how to open my cell to clean it after I accidentally dropped my cell in a cup of sweet tea. I couldnt get teh rotate to work when I was looking at pics so I figure if I got all of the sticky out it couldnt hurt. I seen this followed it got the cell good & clean, put a tiny drop of hair clipper oil on the little part on the board that spins. Put it all back together, tried it & it works. Thanks, thanks, thanks

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    I ordered a screen imma try that I'm not paying 60 dollars to fix a screen for a phone I only paid 100 dollars for thanks

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    I ordered a screen imma try that I'm not paying 60 dollars to fix a screen for a phone I only paid 100 dollars for thanks

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    Hey So Uh I Kinda Broke My Phone & I Tried To Fix It But I Broke The Positive & Negative Cables On A Zte Engage Can You Help ?

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    Did you watch your video? when you get to the speaker you accidently edited out the part where you show us how to repair the Screen, call it the all in 1 screen-LCD-digitizer call it a ONESIE you removed speaker and immediately put speaker back in! just as a suggestive criticismical thought out loud…maybe at least mention the screen removal procedure… It's all good I jerry rigged it.. 

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    HI Jerry,
       Have you removed the 6 screw mother board stud plate on the ZTE N9100 BOOST Force.
    ? . I can't seem to get the plate loose from the back of the LCD any suggestions,
    PS already bought the LCD oops. I would order both the digitizer and the LCD if I can get the screw plate loose. also used  ZTE N9100 phones available from ebay for less than 30.00. I bought one and it works fine. Just thought your subscribers would like the information.

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    yeah, it seems on the video you remove the "earpiece" then reinstall the earpiece and assemble the phone, no screen removal. Does the lcd/digitizer need to be heated to release the glue? or does it gently pry out/ off? Thanks for all the other very clear details!

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    He does a good job. My Phone ZTE Majesty is different. I'm puzzled by the flat wire, or maybe it's a plastic ribbon that connects to the speaker assembly, and the other end goes under the motherboard. Mine is broken where it goes under the motherboard. Oh well, it's interesting to tinker with.

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    I like your video…and I have followed it closely. But I have not been able to find the digitizer for this phone…I seen replacement LCD screens, but as you know the digitizer is glue on to the LCD screen. Can you point me in the right direction so I can purchase the right part?

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    I got down to the digitizer and then you started putting the phone back together.  I trying to replace a cracked screen.  Help!

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    can someone tell me what color the water damage indicator sticker is supposed to be?  before damage and after damage.  thanks!

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    Thanks for the clear, calm, and concise video. In my case simply cleaning the connector and flex cable contacts cleared up the problem of touch screen not responding. Whew!

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    I tried to repair the phone cause the screen would not respond when i turned it on so i got a separate screen and broke the other one and replaced it or at least tried but there was just so much fucking glue

    Répondre
  • Avatar
    septembre 17, 2020 à 9:02
    Permalien

    Thank you for such a great video. Very clear and concise. I've seen a lot of videos on phones and yours is the best hands down. The soft voice was calming as well. Great job!!!

    Répondre

Laisser un commentaire