How to Configure Telnet on Cisco Router using GNS3 and Virtual Machine | SYSNETTECH Solutions

This video shows you the steps to configure Telnet on a Cisco Router or Cisco Switch using the GNS3 network simulator program and a VMware virtual machine.

✅ S U B S C R I B E ►
✅ Article ►

To activate #Telnet:

Step 1: If you have not installed #GNS3 on Windows, Linux, or macOS before, please refer to the following videos.

Windows ➦
Linux / Debian ➦
Linux / Linux Mint ➦
Linux / Ubuntu ➦
macOS ➦

Step 2: After installing it, you need to configure the host to add VMware virtual machine.

Step 3: Also, add a #CiscoRouter before configuring Telnet.

Step 4: After completing the necessary preparations for Telnet configuration, add the Router that you added to the workspace. In addition, add a Switch and a PC.

Step 5: Cable all network devices.

Step 6: Assign the IP address to the FastEthernet interface of the Router.

Step 7: Configure the VMnet setting for the host you added to the workspace. Define any virtual machine running on VMware to Host.

Step 8: To enable Telnet, execute the commands in the 2:35 time frame at the Router’s CLI prompt.

Step 9: After configuring Telnet, download the Putty program to connect to the Router.

➦ Putty:

Step 10: When Putty is open, select Telnet, then type the IP address of the FastEthernet interface of the Router and click Open.

Step 11: Type the username and password that you created after you connected to the Router.

Step 12: Using the virtual machine on GNS3, you will successfully connect to the Router with a Telnet connection!

Step 13: You can check open sessions using the show line command to verify Telnet.

Step 14: If you want to disable Telnet on Cisco Router, execute the transport input ssh command.

Step 15: The transport input ssh command allows only SSH connections. You can also use ACLs to disable it.

Step 16: Don’t forget to subscribe to our YouTube channel for more videos on Cisco training with GNS3!


✅ Buy ►

───────────────RELATED VIDEOS───────────────

➊ How to Configure SSH

➋ How to Configure Router

➌ How to Configure Dynamic NAT

➍ How to Configure EIGRP

➎ How to Configure OSPF

───────────────FOLLOW US───────────────────

✔ Facebook

✔ Twitter

✔ Pinterest

✔ Instagram

✔ LinkedIn


source by SYSNETTECH Solutions



Fondateur de summarynetworks, passionné des nouvelles technologies et des métiers de Réseautique , Master en réseaux et système de télécommunications. ,j’ai affaire à Pascal, Delphi, Java, MATLAB, php …Connaissance du protocole TCP / IP, des applications Ethernet, des WLAN …Planification, installation et dépannage de problèmes de réseau informatique……Installez, configurez et dépannez les périphériques Cisco IOS. Surveillez les performances du réseau et isolez les défaillances du réseau. VLANs, protocoles de routage (RIPv2, EIGRP, OSPF.)…..Manipuler des systèmes embarqués (matériel et logiciel ex: Beaglebone Black)…Linux (Ubuntu, kali, serveur Mandriva Fedora, …). Microsoft (Windows, Windows Server 2003). ……Paquet tracer, GNS3, VMware Workstation, Virtual Box, Filezilla (client / serveur), EasyPhp, serveur Wamp,Le système de gestion WORDPRESS………Installation des caméras de surveillance ( technologie hikvision DVR………..). ,