How To Turn On/Off Hibernate In Windows 10



How To Enable or Disable Hibernate On Windows 10.
Commands Used In Video:
powercfg.exe /hibernate off
powercfg.exe /hibernate on

Whether you want to turn it on or off, here’s how to enable and disable hibernate in Windows 10, how to configure it and how to find out if your PC supports hibernate.

In Windows 10, as with previous versions, there are three basic options when you turn off your computer: shut down, sleep and restart. When you choose shut down, your PC will do different things depending on whether hibernate is enabled or disabled.

Hibernate is – as far as you’re concerned as a user – the same as Sleep mode. It means you can carry on where you left off: all your apps will be open and where you left them, and browser tabs will still be open. Hibernate is also linked with Fast Startup in Windows 10.

In Sleep mode, all this information is stored in RAM, which makes it quick to resume when you wake your PC. But if the power is turned off, or the battery in your laptop runs flat the system state is lost and you’ll have to boot from scratch and start from Windows’ desktop. You might even lose unsaved work.

With hibernate, which is enabled by default on most PCs and laptops, the information about which apps are open and your unsaved documents are also written to the hard drive in a file called hiberfil.sys. Even if your PC has been without power for weeks, it matters not: Windows 10 will read this file when it boots up and restore everything as it was when you clicked the Shut Down button.

If you want to enable hibernation because your PC isn’t saving your progress and “cold” booting each time, here’s how to do it.

This tutorial will apply for computers, laptops, desktops,and tablets running the Windows 10, Windows 8/8.1, Windows 7 operating systems.Works for all major computer manufactures (Dell, HP, Acer, Asus, Toshiba, Lenovo, Samsung).

Views : 73701
windows 10

Source by MDTechVideos

Mourad ELGORMA

Fondateur de summarynetworks, passionné des nouvelles technologies et des métiers de Réseautique , Master en réseaux et système de télécommunications. ,j’ai affaire à Pascal, Delphi, Java, MATLAB, php …Connaissance du protocole TCP / IP, des applications Ethernet, des WLAN …Planification, installation et dépannage de problèmes de réseau informatique……Installez, configurez et dépannez les périphériques Cisco IOS. Surveillez les performances du réseau et isolez les défaillances du réseau. VLANs, protocoles de routage (RIPv2, EIGRP, OSPF.)…..Manipuler des systèmes embarqués (matériel et logiciel ex: Beaglebone Black)…Linux (Ubuntu, kali, serveur Mandriva Fedora, …). Microsoft (Windows, Windows Server 2003). ……Paquet tracer, GNS3, VMware Workstation, Virtual Box, Filezilla (client / serveur), EasyPhp, serveur Wamp,Le système de gestion WORDPRESS………Installation des caméras de surveillance ( technologie hikvision DVR………..). ,

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *